Motorcycle low wheel licence plate holder Yamaha Mt09 / Sp

The product is developed to keep the necessary functions for your vehicle, such as a mudguard and the ability to fit indicators and an LED number plate light that meets European standards (lighting included in the kit). The ultra-reinforced mounting is made of 5.mm thick steel to strengthen the entire number plate holder against vibrations. It attaches to the wheel axle of the swingarm and replaces your aluminum chain tensioning spacer if needed. The swingarm part is made of 5 millimeter thick aluminum. The functionality of the mudguard is made of 3 millimeter thick aluminum. It is curved to fit your tire and prevents splashes onto the passenger and the rider. The entire product is coated with a matte black epoxy paint, which is weather-resistant and can withstand stone impacts. The mudguard number plate holder accommodates all European and International registration plates, as well as stem indicators and an approved LED number plate light or rear light. The blanking plug included in the kit fits in place of the original number plate holder, to prevent any particle ingress. A 1-meter electrical harness along with heat-shrink terminals is provided to connect your indicators and the number plate light; you reuse your original connectors to make the link, allowing for disconnection. For your original indicators, you have the option of taking reference GCY001 to fit the original indicators. Mounting indicators other than the original will require an M8 hole diameter. The mudguard number plate holder adds a futuristic touch. (Indicators are not included)