Bike component accessories

The cockpit

Around the handlebars and stem, many small parts play a key role. The steering cap and its screw adjust the preload of the bearings. The handlebar plugs close off the ends of the handlebars to prevent injuries in case of a fall. The mounts for the speedometer and lights, fixed in front of the handlebars, place the GPS and lamp in the line of sight.

The other components

The components also include:

• Spacers.
• Clamps.
• Adapters.
• Washers.
• Bells.
• Stems.
• Handlebars.

All components are brought together on the peripheral components page.

Cables and frame

The cable guides, cable housing and internal plugs organise the routing of the cables and housings along the frame, preventing them from rubbing or rattling. The adhesive frame and chainstay protections preserve the paint from wear caused by the chain, housings and shoes. These details extend the life of the bike and maintain its value.

Choosing wisely

Each accessory must match the diameter of the part it is attached to: handlebars of thirty-one point eight or thirty-five millimetres, steerer of one and one eighth inches, frame tube. It’s also important to check compatibility with the speedometer or lamp, which often use specific mounts for each brand. Tighten the small screws to the recommended torque, without excess, to avoid damaging carbon parts.

Good deals

Good finds can also be found in the good deals, promotions, clearance, sales, Black Friday. The new arrivals showcase the latest collections, and the items shipped in 24h are prepared and sent within 24 hours. The highlights of the year follow a steady schedule: the Black Friday in late autumn, the year-end festivities, the winter sales, the French Days of spring, followed by the summer sales and back-to-school.

Frequently asked questions

What is the purpose of the screw on the steering cap?

It adjusts the preload of the steering bearings: tightened before the stem screws, it eliminates play without hindering the fork's rotation. It does not hold the stem in place, which is secured by its own screws.

Why are handlebar plugs important?

They close off the ends of the handlebars, which could cause injury in case of a fall, and keep the handlebar tape or grips in place. A lost plug should be replaced quickly, before the next ride.

How can you protect your bike frame from wear?

Adhesive protections are placed at contact points of the housings, under the top tube and on the chainstay, where the chain strikes on bumpy terrain. They prevent paint chips and preserve the carbon.

Which mount should you choose for attaching your GPS or lamp?

A forward offset mount in front of the handlebars places the GPS and lamp in the line of sight, without cluttering your hands. Check the diameter of the handlebars and the compatibility with your device’s mount.

What is the purpose of cable guides on a bike?

They hold the brake and derailleur cables along the frame, prevent them from rubbing or flapping, and ensure precise operation. On frames with external routing, they can be easily replaced in case of breakage.