Cristec Load distributor RCE

The charge distributors RCE+ allow you to charge 2 or 3 batteries simultaneously from a single alternator without connecting the batteries together. Discharging the service battery, for example, won't cause the starter battery to discharge.

MOSFFET Technology

The technology used, based on MOSFET transistors, ensures negligible voltage drop between the input and the outputs. This is a major advantage over a diode distributor.

No voltage drop

Since there is no voltage drop caused by the RCE+ distributor, it's not necessary to increase the output voltage of the alternator.

Multi voltages

The distributor works with voltages of 12 VDC or 24 VDC and also allows for the use of LiFePO4 (Lithium) batteries.

2 outputs

The charge distributors RCE+ are used to split an input power source (alternator, solar regulator, hydro-generator, etc.) into two or three consumers (batteries, consumers).

IGNITION ready

Some alternators require a DC voltage on the + output to start charging. Inserting a charge distributor will prevent any back voltage from the battery and the alternator will not start. The RCE+ features an IG input that will power the + output when the engine is started.

Interchangeability

The RCE+ is designed to be fully interchangeable with previous RCE models without any modifications.

Standard installation