Access Design Motorcycle license plate holder X-ADV

The "low wheel" plate holder adds a futuristic touch. It has been developed to keep the necessary functions of your vehicle. It's possible to fit the indicators as well as LED number plate lighting compliant with European standards.

The mounting is made of 5mm thick steel, reinforced with folds to prevent any vibration. The holder attaches to the wheel axle of the swinging arm and replaces your aluminium spacer that serves as tension for your chain.
The arm part is made of 5mm thick aluminium.
The functionality of the low wheel holder is made of 3mm thick aluminium. It has been bent to fit your tyre, preventing splashes on the passenger and also the driver.
The location allows for the installation of the registration plate as well as post indicators and the approved LED lighting or rear brake light.
The cover replaces the plate holder and takes back your original brake light.
The wiring harness is provided for connecting your indicators, the rear light and number plate lighting.
The entire low wheel plate holder and cover is coated with a matte black epoxy paint, resistant to weather and stone impacts.
All French and international registration plates are adaptable to the low wheel plate holder.

Contents:

• 1 "Low wheel" plate holder
• 1 reinforced 5mm thick steel mount
• 1 arm in 5mm thick aluminium
• 1 cover taking back your original brake light and its mounting kit
• 1 approved LED lighting
• 12 crimpable heat-shrink connectors for connecting the LED lighting, your indicators and brake light

The connection of the connectors is made on the main wiring harness and behind the arm of the low wheel plate holder. (Keep the original plugs of your indicators, number plate lighting and brake light, cut the wires 15cm after the original connector).

• 7 FHC M6x20mm screws + 7 M6 nuts + 7 Ø 6mm washers
• 7 black nut covers (to be used on the low wheel and the swinging arm mount once the two parts are assembled)
• 7 black covers for FHC countersunk screws (to be used on the low wheel and the swinging arm mount once the two parts are assembled)
• 2 cables of different colours, each 1 metre long for connecting the LED lighting
• 4 cables of different colours, each 1 metre long for connecting the indicators
• 1 braided sleeve of 1.10 metres for passing the electrical cables, supplied with ties
• The indicators are not included

Specifications

Colour: Black

Approval: Not approved